 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| OX-400 / OX 401 Oven Controlled Crystal Oscillator OX-400 / 401 Features * * * * * 4-Pin Dip Fast warm-up TCXO replacement for better short term stability Frequency Range, 10 MHz to 160 MHz Standard frequencies, 20 MHz (SC); 13 MHz (AT) * * * * Applications Base stations Test equipment Synthesizers Military communication equipment Performance Specifications Frequency Stabilities1 (AT-Cut Crystal-Standard - 10 to 160 MHz) Parameter vs. operating temperature range (referenced to +25C) Min -100 -250 -250 -0.5 -20 -20 -10 -300 -500 Typical Max +100 +250 +250 +0.5 +20 +20 +10 +300 +500 3 Units ppb ppb ppb ppm ppb ppb ppb ppb ppb minutes Condition Options5 -20 to +70C -20 to +70C -40 to +85C at time of shipment, nominal EFC VS 5% static Load 5% static after 30 days of operation 60MHz after 30 days of operation 60 MHz after 30 days of operation to 200ppb of final frequency (1 hour reading) @ +25C -20 to +70C -20 to +70C -40 to +85C at time of shipment, nominal EFC VS 5% static Load 5% static after 30 days of operation 60 MHz; after 30 days of operation 60 MHz; after 30 days of operation Initial tolerance vs. supply voltage change vs. load change vs. aging / day vs. aging / year Warm-up time Frequency Stabilities1 (SC-Cut Crystal-Option - 10 to 160 MHz) vs. operating temperature range (referenced to +25C) Initial tolerance vs. supply voltage change vs. load change vs. aging / day vs. aging / year vs. aging / year -10 -25 -50 -0.2 -10 -10 -5.0 -100 -500 +10 +25 +50 +0.2 +10 +10 +5.0 +100 +500 ppb ppb ppb ppm ppb ppb ppb ppb ppb Page 1 of 5 Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Performance Specifications Supply Voltage (Vs) Parameter Supply voltage (standard) Min 3.135 4.75 Typical 3.3 5.0 Max 3.465 5.25 2.5 1.0 Units VDC VDC Watts Watts Condition Power consumption during warm-up steady state @ +25C RF Output Signal [standard] Load Signal Level (Vol) Signal Level (Vol) Signal Level (Voh) Signal Level (Voh) Duty Cycle Signal Load Output Power @3,3V Putput Power @ 5.0V Harmonics Tuning Range Tuning Range Linearity Tuning Slope Control Voltage Range 0.0 0.0 1.4 2 5.0 1.0 10% Positive 2.8 4.0 -65 -95 -120 -140 -145 8.0 Handling & Processing Note VDC VDC dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz g with Vs=3.3V with Vs=5.0V 1 Hz 10 Hz 100 Hz 1 kHz 10 kHz 2 5 50 5 8 8 11 -30 Fixed OCXO; No adjust 12 3 ppm ppm with AT cut crystal with SC cut crystal 2.4 3.5 45 55 Sine Wave dBm dBm dBm 50 load 50 load 50 load % 15 0.4 0.5 VDC HCMOS pF VDC with Vs=3.3V and 15pF Load with Vs=5.0V and 15pF Load with Vs=3.3V and 15pF Load with Vs=5.0V and 15pF Load @ (Voh-Vol)/2 Frequency Tuning (EFC) 10 to 160 MHz Option5 @ 10MHz Additional Parameters Phase Noise3 Weight Processing & Packing supply voltage (Vs) Output Load Operable Temperature Range Storage Temperature Range -55 -55 Absolute Maximum Ratings 6.5 50 +85 +125 V pF C C with Vs=3.3 & 5.0 VDC Page 2 of 5 Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Outline Drawing / Enclosure OX-400 Height "H" 8.5 Pin Length "L" 5.85min. Pin Connections 1 7 8 14 Electronic Frequency Control Input (EFC) Ground (Case) RF Output Supply Voltage Input OX-401 Height "H" 10.8 Pin Length "L" N/A Pin Connections 1 7 8 14 Electronic Frequency Control Input (EFC) Ground (Case) RF Output Supply Voltage Input Dimensions in inches mm Page 3 of 5 Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Standard Shipping Method (OX-401) Lage im Gurt Position in tape Pin 1 A X B K P *bei W 24 mm nur untere Lochreihe by W 24 mm only lower hole line Abwickelrichtung Unwinding direction Gurtunterseite Tape buttom side Gurtoberseite Tape upper side Enclosure Type Typ OX-401 Tape Width W (mm) 44 Quantity per meter 50 Quantity per reel 300 Dimension P 20 Recommended Reflow Profile Profile Feature Average ramp-up rate (TL to TP) Preheat -Temperature Min TSmin -Temperature Min TSmax -Time (min to max) tS Pb-Free Assembly/ Sn-Pb Assembly 3C/second max. 150C 200C 60-180 seconds 3C/second max 217C 60-150 seconds max 260C Profile Feature Time 25C to Peak Temperature Time maintained above -Temperature (TL) -Time (tL) Pb-Free Assembly/ Sn-Pb Assembly 8 minutes max. 217C 60-150 seconds TSmax to TL -Ramp-up Rate Time maintained above -Temperature (TL) -Time (tL) Peak Temperature (TP) Time within 5C of actual Peak Temperature (tP) Ramp-down Rate 20-40 seconds 6C/ second max Note: All temperatures refer to topside of the package, measured on the package body surface. Page 4 of 5 Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Ordering Information OX - 400 0 - D A E - 258 0 - 10M0000000 Product Family OX: OCXO Frequency Package THT version: 400 SMD version: 401 Height 0: 8.5 mm 1: 10.8 mm Stability Code 108: 10ppb 258: 25ppb 508: 50ppb 107: 100ppb 257: 250ppb Temperature Range E: -40C to +85C J: -20C to +70C P: 0C to +50C Frequency Control 0: No Tuning 1: 5.0 to 12ppm 2: 1.0 to 3.0ppm Supply Voltage D: 5V E: 3.3V RF Output Code A: HCMOS E: Sinewave Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modification. 5. Contact factory for availability. For Additional Information, Please Contact USA: Vectron International 267 Lowell Road Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Europe: Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30 Asia: Vectron International 1F-2F, No 8 Workshop, No 308 Fenju Road WaiGaoQiao Free Trade Zone Pudong, Shanghai, China 200131 Tel: 86.21.5048.0777 Fax: 86.21.5048.1881 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 8/2008 Page 5 of 5 Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com |
Price & Availability of OX-4011-EEP-508
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |